Over 25 years in the Industry

   Call us at  954.771.5575

Important: We have Moved to a New Address

4026 NE 5th Ave Oakland Park FL 33334

Not Far from our old location give us a call if you cant find us

 Beat 'Em with a Stick!  


GM Bellhousings

Lakewood cast aluminum bellhousings connect Chevy small and big block engines to transmissions utilizing the standard GM pattern such as the Muncie, Saginaw, Borg Warner T10 and Tremec TKX or TKO transmissions.
The bellhousings are designed for both GM cars and trucks and other manufacturers where swap applications are being installed. These bellhousing kits come complete with clutch fork boot, inspection cover and Grade 8 mounting hardware. The bellhousing, clutch fork boot, inspection covers and mounting hardware kits are also available individually.
Lightweight cast aluminum design similar to the original equipment bellhousings
Lower cost non-SFI rated option if your project does not require the steel SFI rated unit
Designed For Hydraulic and Mechanical Fork Throwout Bearing Linkage
Bellhousing Depth: 6.45 in
Clutch Fork Opening: 2.125 In X 3.3 In
Transmission Bore Diameter: 4.684 In
Includes Grade 8 Hardware
lakewood gm bell

Lakewood LK4000K Cast-Aluminum Bellhousing Kit For Small and Big Block chevy

The Quick Time RM-6022 bellhousing connects small block and big block Chevy engines to transmissions utilizing the GM standard pattern such as the Muncie, Saginaw, Borg Warner T10 and Tremec TKO transmissions. This bellhousing is S.F.I. 6.1 certified which is required by many sanctioning bodies for cars running 11.49 or faster in the quarter mile. This bellhousing is a universal fit bellhousing and is not vehicle specific. The Quick Time bellhousings are produced using a unique spin forming process which results in a very high strength material. This high material strength allows the Quick Time bellhousings to be light weight while maintaining the protection you desire. Note: (Transmission Mounting Bolts Not Included)
Quick Time Bellhousings are the most accurate bellhousings available due to our unique manufacturing processes
QuickTime cones are spun, not rolled or stamped. This allows Quick Time Bellhousings to be the most dimensionally stable Bellhousings available
Built from high grade steel – Work hardens to over 80,000 PSI strength. Over two times the strength of other steel bellhousings
100% built in the USA
Patent on 16 points of Bellhousing Design & Process

quicktime gm tko bell

QUICK TIME RM-6022 GM SFI Approved BELLHOUSING Fits Tko & Others

305/350 to MUNCIE/WIDE EAR T5 PATTERN Steel Bellhousing

LS1 to GMTKO500/600 SFI Steel Bellhousing $599.00


LT1 to LT1 T56/Magnum SFI Steel Bellhousing  $599.00 

LS1 to LS1 T56/Magnum SFI Steel Bellhousing $599.00


under construction....7/16